Tripp-Lite N785-INT-SC-SM El Manual Del Propietario página 3

Installation
Note: To avoid damage due to Electrostatic Discharge (ESD), it is recommended
you handle the product while wearing an ESD wrist grounding strap or by touching a
conductive surface (such as metal) to discharge any potential ESD prior to handling
the product.
1. Using a Cat5e/Cat6 cable, connect the RJ45 port on the
N785-INT-SC-SM media converter to your network.
2. Using an appropriate fiber cable, connect the N785-INT-SC-SM
media converter to a second N785-INT-SC-SM or another identical
(1310 nm/singlemode/1000M/20 km) media converter, ensuring
the TX port of one unit is connected to the RX port of the other.
Tripp Lite's N356-Series Duplex Singlemode 8.3/125 (SC/SC) cables
are recommended.
Note: Simplex singlemode 9/125 fiber patch cables are also supported. Two
simplex cables are required for each installation.
3. Using a Cat5e/Cat6 cable, connect the RJ45 port on the second
N785-INT-SC-SM media converter to your network device
(workstation, hub, switch, etc).
4. Connect the included external power supplies to each media
converter.
1-456-933900.indb 3
Network
Power Source
Power Source
3
Network Device
3/13/2019 9:31:12