Using Standby/Sleep/Hibernation Modes With The Dynadock 4K Docking Station - Toshiba dynadock 4K Guía De Usuario

Using the dynadock 4K Docking Station and
Using Standby/Sleep/Hibernation modes
with the dynadock 4K docking station
When your docked computer enters Standby/Sleep/
Hibernation mode, devices connected to the dynadock 4K
docking station will not function until the computer returns to
an active state. For example, if you are using the Ethernet
port for high-speed network access, network access will not
be available until the computer resumes from Standby/
Sleep/Hibernation.
In addition, please keep in mind the following important
information regarding the effect of Standby/Sleep/
Hibernation mode on external displays connected to the
dynadock 4K docking station:
❖
The external display connected to the dynadock 4K
docking station will go blank if the computer enters
Standby/Sleep/Hibernation mode.
❖
In Mirror mode, the external display retains the settings it
had previously when the computer resumes from
Standby/Sleep/Hibernation.
❖
In Extended mode, windows that were previously on the
external display may appear on the computer's built-in
display when the computer resumes from Standby/
Sleep/Hibernation. You may need to reposition the
windows by dragging them to the external desktop
again.
❖
If the external display is in Extended mode and the
computer requires you to log in after resuming from
Standby/Sleep/Hibernation, the login screen may
appear on the primary computer display, not the external
display.
Adjusting Settings
35