AEG KM3 Serie Manual De Instrucciones página 9

• UNPLUG FROM OUTLET WHEN NOT IN USE, BEFORE INSERTING OR REMOVING
PARTS AND BEFORE CLEANING.
TROUBLESHOOTING
PROBLEM
The motor slows down during
operation.
The appliance does not start.
The appliance vibrates/moves
during operation.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an AEG service center that
can remove and recycle the battery and electric parts in a safe and professional way. Follow your country's
rules for the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
www.aeg.com
EKM3xxx_Kitchen Machine_Electrlx - elias aeg.indd 9
POSSIBLE CAUSE
Amount of dough may exceed maximum
capacity.
Dough may be too wet, it sticks onto the
side of the bowl.
The appliance is not connected to the
mains.
The speed selector was not in "OFF"
position when the machine was
unplugged.
The suction feet are not fixed to the
surface properly.
It is normal for heavy loads (e.g heavy
dough, cheese).
SOLUTION
Remove half and process in two batches.
Add more flour, 1 tablespoon at a time until the
motor speeds up. Process until dough cleans
the side of the bowl.
Make sure to plug in the appliance before
operation.
Turn to speed selector to "OFF" position, and
then to the desired speed.
Make sure the suction feet are clean. Place the
machine on a smooth and shiny surface.
Remove half and process in two batches.
GB
DE
AR
ES
FA
FR
GR
IT
NL
PT
9
2017-05-24 17:06:05