Technical Data; Noise Information; Vibration Information - Worx WX721 Manual Del Usuario

TECHNICAL DATA

Type Wx721 Wx722 Wx722.1 (7- designation of machinery, representative of angle
grinder)
Voltage
Power input
Rated speed
Speed control adjustment
Disc size
Disc bore
Spindle thread
Protection class
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut .
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
Angle grinder
Wx721
220-240V~50/60Hz
1010W
11000/min
/
125mm
22.2mm
M14
2.2kg
Vibration emission value a
Uncertainty K = 1.5m/s²
Wx722 Wx722.1
1200W
12000/min
3500-12000/min
/II
L
pA
L
wA
=5.20m/s
h
: 87 .3dB(A)
: 98.3dB(A)
7
3.0dB(A)
80dB(A)
2
EN