Stay-Open Feature
IMPORTANT: Stay-Open Feature should be used only by adults, because the auto-close feature will be disabled,
allowing children to freely pass through the gate.
• To make use of the Stay-Open Feature, simply swing the door slightly past 90 degrees open in either
direction. The door will remain open until it is swung closed.
Swing control operation
• Rotate the knob to the side on gate stopper to determine the direction the gate door will swing.
Gate opens in both directions when gate stopper is not rotated.
Troubleshooting:
If the gate does not remain closed, the locking handle is too close to the corner of the locking housing.
This can be corrected by loosening the upper tension knobs by turning them outward, creating the
proper distance, as described in step 4 /Figure 4D.
If the gate does not remain in its opening, it was not installed properly. Remove and reinstall the gate,
make sure the gate is flat, straight, and in perpendicular to the floor, as shown in figure 3A.
Care:
CLEANING: Clean the safety gate using warm water and a mild detergent. Use a soft cloth or sponge to
avoid scratches. Never use solvents or chemicals to clean the safety gate.
Swing to the open positions
gate stopper
Distributed in the United States by
North States Industries, Inc.
5455 Highway 169 N
Plymouth, MN 55442
www.northstatesind.com
Manufactured in Guang Dong, China
Page 5