Electrical Connection - Moretti Forni iRoll iP 33 Manual Instrucciones

2.3

ELECTRICAL CONNECTION

The machine must have an equipotential system. Put together the terminaI that has the symbol
on it (situated on the back side of the machine) and a cable with a minimal section of 2.5 to 6
2
mm .
The machine is equipped with connecting cable located on the side of the machine. It's
essential to mount a normalized and polarized plug at the end of the cable (the distinction
between phase and neutral must be unequivocal)
WARNING
The electric net must be provided with an automatic differential switch with suitable
characteristics for the machine: the opening distance between the contacts must be of at
least 3 mm. It is particularly important to have an efficient ground element. Verify that the
electrical setup corresponds with the numbers of the technical characteristics (1.4.1) and on
the small plate at the back of the machine.
UK/9