Publicidad
Idiomas disponibles
Idiomas disponibles
6
3.1 TRANSPORT AND STORAGE
In order not to cause damages to the distributor, the loading and unloading manoeuvring
have to be performed with particular care.
It is possible to lift the distributor, both with a motor or hand lift truck placing the forks in the part
under the distributor and on the side clearly shown by the symbol placed on the carton packaging.
It is forbidden:
- To turn the distributor upside down;
- To drag the distributor with ropes or similar;
- To lift the distributor from the side;
- To lift the distributor with whatever sling or rope;
- To shake the distributor and its packaging.
As to the storage of the machines, it is appropriate that the environment of conservation is
very dry with temperatures between 0° ÷ 40° C..
It is important not to put one packed machine on the other and to maintain the vertical position
shown by the arrows on the packaging itself.
It is advised to dispose of the packaging materials at the end of the installation respecting
the environment.
3.2 UNPACKING
The machine is shipped completely assembled and ready to install in a single cardboard carton.
The carton must be removed with care to avoid damage to the cabinet. Examine the machine both
inside and outside and notify the carrier immediately of any damage.
Do not destroy any carton or wrapping material until they have been examined by the carrier or his
representative.
N.B. The keys are fixed with tape inside the coin return cup.
After unpacking, the machine can be put into operation by following these instructions.
3.3 WARNINGS FOR THE INSTALLATION
The machine is sold without payment system. Therefore whatever default to the
machine or damages to persons or things due to an incorrect installation, use or similar caused by
the payment system will be only and exclusively charged to those who have carried out the
installation of the machine.
3.4 WARNINGS FOR THE DEMOLITION OF THE MACHINE
If the machine is deinstalled in order to be definitively demolited, it is obbligatory to follow
the rules in force reguarding the protection of the environment.
All ferrous, plastic or similar materials should be taken to the authorized depots.
Particular care should be given to:
- Whichever type of gases (see identification plate) present in the refrigeration unit should be
recovered with suitable equipment by specialized firms.
- Insulation materials should be recovered by specialized firms.
FAS INTERNATIONAL srl
3 - COMMISSIONING PROCEDURE
Publicidad
Capítulos
