Systems Of Payment; Programming Of The Parameters Of The Interface Card - FAS 480 ELE Manual De Instrucciones

14
The following systems of payment can be mounted:
1) Coin validator:
- MARS MS130B1
- NRI G-18
- FAGE (24V)
- COGES EUR 10
2) Coin mechanism:
- MARS 1600,1900 (Executive)
- NRI (Executive)
- COGES ECS (Executive)
NOTA BENE:
The coin mechanisms must be bought complete with display, the standard machine is not
fit with a display.
8.1 MOUNTING THE COIN VALIDATOR FIG. 5
If you want to use only the coin validator it is necessary to have an interface card (code FAS
000000) to mount inside the coin mechanism on the special supports. This card has to be
connected to the connector on which the coin mechanism is generally connected, while the
validator has to be connected to the flat connector 16 circuits of the interface (ref. B fig. 5).
The coin validator has to be requested from the suppliers already mounted on the frame. This
allows a proper mechanical hooking to the machine and a correct directioning of the coins to the
cash.
The interface selector card is complete with a display and it can be programmed through the
selection push-button panel of the machine.

8.2 PROGRAMMING OF THE PARAMETERS OF THE INTERFACE CARD

FAS INTERNATIONAL srl

8 SYSTEMS OF PAYMENT

fig. E
Downloaded from www.vendingbar.gr