Tabla de contenido
Publicidad
3.2 Installation
This Switch can be either installed on the standard 19-inch mountable rack or
located on the desktop.
Caution:
Please unplug the power cord before installing or removing the Switch.
3.2.1
Desktop Installation
To install the Switch on the desktop, please follow the steps:
1) Set the Switch on a flat surface strong enough to support the entire weight
of the Switch with all fittings.
2) Remove the adhesive backing papers from the rubber feet.
3) Turnover the Switch and attach the supplied rubber feet to the recessed
areas on the bottom at each corner of the Switch.
4) Upturn the Switch and connect it to the network devices while keep
enough ventilation space around.
5) Connect the Switch to power source with the provided power cord.
Caution:
Please avoid any heavy thing placed on the Switch.
3.2.2
Rack Installation
To install the Switch in an EIA standard-sized, 19-inch rack, follow the
instructions described below:
Figure 3-1 Attaching Rubber Feet
9
Publicidad
Tabla de contenido
