,
You hear 1 beep to indicate the Quadpacer has been deactivated or
you hear 2 beeps to indicate the Quadpacer has been activated.
Cord wrap on deluxe charger (specifi c types only)
If your type includes the deluxe charger cover and base, the travel charger
is pre-installed inside the cover. If you want to shorten the mains cord, you
can store excess cord in the cord wrap feature built into the charger base.
1
To separate the charger cover from the charger base, press the two
grey snap bars on the charger base and pull the white charger cover
upwards.
2
Wrap excess power cord around the grey charger base as shown in
the picture. Be sure to wrap the cord on the inside of the two snap
levers.
3
When you have stored the excess cord, guide the mains cord
through the small groove in the rear of the grey charger base.
4
To reattach the charger cover, press it down over the charger base
until it snaps into place.
Tip: For extra convenience during travel, you can remove the travel charger and
use it without the charger cover and charger base.
Cord wrap on sanitiser with integrated charger (specifi c types
only)
-
If your type includes the sanitiser, you can store excess cord in the cord
wrap feature built into the bottom of the sanitiser.
ENGLISH
9