Philips HQT788/00 Manual De Instrucciones página 9

1 Disconnect the appliance from the mains
and let the appliance run until the motor
stops.
C
2 Undo the screw in the housing of the
trimmer.
C
3 Separate the 2 housing parts by means of a
screwdriver.
C
4 Insert the screwdriver into the small slot
in the printed circuit board marked with
an arrow. Push the screwdriver down until
parts of the printed circuit board break
off.
C
5 Press the hook and remove the printed
circuit board.
C
6 Separate the rechargeable battery from
the appliance by means of a screwdriver.
Do not connect the appliance to the mains again
after it has been opened!
ENGLISH
11