On The Product; Basic Safety Precautions - Hilti DCH-SL LG Manual De Instrucciones

1.5 On the product

Laser information
Laser class 2 based on standard IEC60825-1 / EN60825-
1:2014 and compliant with CFR 21 § 1040 (Laser Notice
56).
Do not look straight into the laser beam.
2 Safety

2.1 Basic safety precautions

WARNING! Read all safety precautions and other instructions. The
product and its ancillary equipment can present hazards if used incorrectly
by untrained personnel or if used not in accordance with the intended use.
Keep all safety precautions and instructions for future reference.
▶ Check the product for damage before use. Have damage repaired by Hilti
Service.
▶ Stay alert, watch what you are doing and use common sense when
operating the product. Do not use the tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while
operating the tool can result in serious personal injury.
▶ Do not render safety devices ineffective and do not remove information
and warning notices.
▶ Laser radiation in excess of Class 2 can be emitted if the product is
opened without correct procedure being followed. Have the product
repaired only by Hilti Service.
▶ Do not tamper with or attempt to make alterations to the product.
▶ Never aim the product against the sun or other powerful light sources.
▶ Take the influences of the surrounding area into account. Do not use the
tool where there is a risk of fire or explosion.
▶ Check the accuracy of the product if it has been dropped or subjected to
other mechanical stresses.
▶ Although the product is designed for the tough conditions of jobsite use,
like other laser instruments it should be treated with care.
▶ Comply with national health and safety requirements.
2.2 Working safely with laser tools
▶ Laser Class 2/Class II devices may be operated only by appropriately
trained persons.
▶ Laser beams should not be projected at eye height.
▶ Make sure that the laser beam is not accidentally projected on to surfaces
that produce mirror-like reflections.
▶ Do not permit the laser beam to project beyond the controlled area.
▶ Switch the laser tool off when it is not in use.
8 English 2266038
*2266038*