Time Setup; Sensor Connection - Gima RS01 Manual De Usuario

15

4.2.7 Time Setup

Time setup menu is showed as Figure 4-2-7.
Callout Function
1
Set Year
2
Set Month
3 Set Day
4 Set Hour
5 Set Minute
6
Are you sure?
7 Exit
Table 4-2-7
Note: You shall not set up time when the device is in record status.

4.3 Sensor Connection

4.3.1 Nose Air Flow Monitoring
Unpack the Nasal cannula,wrest down the screw cap following Figure 4-3-1-1,
then insert the Nasal cannula in its upper-right jack and screw down.
Insert the tie-in in sleep apnea screen meter, and the oxygen-absorbing apparatus
in the nose, with oxygen-dividing connection tube round between the nose and
chin. Adapt orientation circle to a comfortable position, then power on, and after
serval seconds, the waveform is stable and you can examine respiration status.
Figure 4-2-7 Time setup menu
Instruction
Year setup, 2010~2099 can be selected.
Month setup, 1~12 can be selected.
Day setup, 1~31 can be selected.
Hour setup, 0~23 can be selected.
Minute setup, 0~59 can be selected.
Confirming information, NO/YES can be selected,
YES: confirm NO: cancel
Exit to the upper-level menu. When exit in YES
status, the setup you have done takes effect, at the
same time display the effected time.
ENGLISH