Tripp-Lite DMCVW4555X4 El Manual Del Propietario página 9

Assembly
7a
Install the Adapter Brackets
For Flat-Back Screens
Note: Choose appropriate screws and spacers according to the type of screens.
• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
• Repeat procedure for the second display.
Tighten all screws, but do not over-tighten.
7b
Install the Adapter Brackets
For Recessed-Back Screen
or to Access A/V Inputs
M-C
M-F
M-G
Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.
• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.
• Repeat procedure for the second display.
Tighten all screws, but do not over-tighten.
M-C / M-D / M-E
or
M-F
M-G
M-A / M-B / M-C
M-D / M-E
or
M-F
M-H
9
M-F
M-D / M-E
or
M-F
M-G
M-H