Publicidad
Idiomas disponibles
Idiomas disponibles
3. Hang Screen onto Wall Plate
Wall
Using an assistant or mechanical lifting equipment, hook the screen over the top of the wall plate. Tighten the
safety screws on the adapter brackets with the appropriate screwdriver.
IMPORTANT: Make sure the screen is correctly hooked and the safety screws are locked securely
before releasing the screen.
4. Adjustment
To adjust the tilt angle, loosen the Tilt Adjusting Knobs located on the sides of the adapter brackets. Once the
screen is at the desired angle, retighten the knobs to secure.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
17-03-421-9336CD.indb 8
Wall
Safety Screw
Tilt Adjusting Knobs
8
0°
-10°
4/3/2017 3:52:17 PM
Publicidad
