Mutsy IGO Instrucciones página 3

UK I Instruction manual Cup holder Igo
Introduction
To be able to make the best use of
this product, we recommend that
you use it carefully and maintain
it properly. If you have any questi-
ons, comments, problems or com-
plaints, please contact your retailer.
Warrant
There is a 2-year warranty for all
Mutsy products, starting on the
day of purchase. Details can be
read in the terms and conditions
of the warranty at www.mutsy.com
under service > warranty.
Warnings
· The cup holder and attachment
clip are designed especially for
the Mutsy Igo frame.
· Before use, make sure that the
cup holder is properly attached.
· Do not place a cup containing
hot liquid in the cup holder.
· Remove the cup holder when fol-
ding the frame.
Fitting attachment clip (A) and
cup holder (B)
· Position the attachment clip at
the required height on the
frame by clicking the clamp
of the attachment clip around
the tube.
· You attach the cup holder to
the attachment clip by sliding
the recess at the back of the
cup holder over the button of
the attachment clip. When you
hear the cup holder click into
place, this has been fitted cor-
rectly to the attachment clip.
· After it has been fitted, the cup
holder can freely move from left
to right; this is to prevent spil-
lage when riding over uneven
surfaces.
Removing attachment clip (A) and
cup holder (B)
· You remove the cup holder
from the attachment clip by
pushing the cup holder up-
wards so that the button of the
attachment clip can be clicked
out of the recess in the holder.
· Detach the attachment clip
from the frame by pressing on
the lip and pushing this away
from the frame.