Subject:
Shredder Knives Kit
Kit:
99944300014
Model(s):
3" Chipper/Shredders (excluding SC-2013)
Before inspecting or servicing any part of this machine, shut off power source, disconnect the spark plug wire from the
spark plug, disconnect the battery cables (when applicable), and make sure all moving parts have come to a complete stop.
The Rectangular Shredder Knives Kit is a replacement kit to replace existing dull or damaged knives. The serrated shredder
knives are designed to offer long life and can be reversed if they become dull. To remove the knives or to install a complete
new shredder kit proceed as follows.
NOTE
This shredder kit uses an improved knife pattern to provide
more complete shredding, durability, and easier feeding.
Care must be taken to insure the knives and spacers are
installed properly to maintain rotor balance.
1. Remove belt guards from under engine frame, remove
discharge cover and screen.
2. Remove #10-24 nuts and bolts from knife shafts.
3. Align shaft with 5/8" hole in rear of frame and small hole
in front of machine by the chipper chute.
4. Using a small punch or rod drive the shaft towards and
out the rear 5/8" hole.
5. To assemble, insert shaft through 5/8" hole in rear of
frame and slide knives and spacers in their proper order
(see drawing) onto the shaft. Install a new #10-24 nut
and bolt.
6. Repeat steps 3-5 to assemble the other three shafts.
7. When completed install discharge screen, and discharge
cover, torque all 3/8" bolts to 33 ft-lbs. and test run
machine.
99922205592
Shredder Knives Kit 99944300014
WARNING
The serrated edge of the shredder knives should face the
same direction as the cutting edge of the chipper blades.
Never reuse the #10-24 nut and bolt, always install new
parts when repairing. Never reuse shafts or spacers if they
show signs of wear or abuse. Install new ones.
4
5
9
6
- 1 -
INSTRUCTION SHEET
IMPORTANT
8
7
11
12
4
©2020 ECHO Incorporated. All Rights Reserved.
©2020 ECHO Incorporated. Tous Les Droits Sont Réservés.
©2020 ECHO Incorporated. Todos Los Derechos Reservados.