Nanoleaf Shapes Guia De Inicio Rapido página 5

1x
Make sure you have enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
calculator at nanoleaf.me/myshapes.
When mounting, apply strong
pressure to the center of the panel
for 30 seconds.
Important Installation Tips
42W 1x
The Controller and Power
Supply can be connected to any
panel in your setup.
500x
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil.
Tape is NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).