Preparing Cappuccino - Silvercrest SEMM 1470 A2 Instrucciones De Uso

Cafetera espresso
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 244

Preparing cappuccino

1) Ensure that there is enough water in the water tank z. Add more water if
necessary.
2) Ensure that there is enough milk in the milk tank 6. Add more milk if necessary.
3) Select whether you want prepare a cappuccino with a single or double
espresso and fit the corresponding espresso sieve s d in the sieve holder
p.
4) Add the espresso powder to the espresso sieve s d and fit the sieve
holder p.
5) Place a suitable cup on the drip grille 8. Depending on the size of the cup,
you may also want to pull out the tray for small cups 9 and place the cup
on this.
6) Set the milk nozzle 0 so that it is pointing into the cup.
7) Use the "Steam quantity" dial 5 to adjust how much steam comes out of
the milk nozzle 0 together with the milk. This changes the consistency of
the milk foam:
Turn the "Steam quantity" dial 5 anticlockwise to decrease the amount
of steam. The milk foam becomes coarser.
Turn the "Steam quantity" dial 5 clockwise to increase the amount of
steam. The milk foam becomes creamier. Make sure you do not turn the
"Steam quantity" dial 5 further than the " " marking. Otherwise, you will
be in cleaning mode (see section "Cleaning and care").
NOTE
You can also correct the amount of steam during preparation by turning the
"Steam quantity" dial 5.
8) Switch the appliance on using the on/off switch i and wait until all control
lamps light up permanently. The appliance has now heated up.
9) Press the "Small" cappuccino button e
cappuccino. The control lamp for the "Small" cappuccino button e lights up.
Press the "Large" cappuccino button 2
cappuccino. The control lamp for the "Large" cappuccino button 2
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet q,
the milk has stopped flowing out of the milk nozzle 0 and all control lamps
light up. You can now remove your cappuccino.
SEMM 1470 A2
if you want to prepare a single
if you want to prepare a large
GB │ IE
 17

Publicidad

Tabla de contenido
loading

Tabla de contenido