Publicidad
ASSEMBLY INSTRUCTIONS
1.
Shut off the water supply and remove the old faucet.
Note: Each valve stop should be turned clockwise.
2.
Install the faucet:
a. Remove the preassembled mounting nuts (C) from
the faucet (A) and place the base plate (B) and the
faucet (A) in position on the sink.
Note: If the sink surface is uneven, use silicone
sealant (not included) to create a watertight seal.
b. From under the sink, thread the mounting nuts (C)
onto the faucet (A).
c. Tighten the mounting nuts (C).
Note: Tighten mounting nuts until snug. Do not
overtighten.
3.
Connect a 1/2 in. IPS faucet connector or coupling nuts
(not included) with 3/8 in. O.D. ball-nose risers (not
included) to the water supplies underneath the sink
using wrenches (not included).
Note: Refer to the local plumbing codes for permissible
types of water supply connectors.
1
2
A
C
3 3 3 3
4
B
Lowes.com
Publicidad
