Technical Specifications - VGE XCLEAR UV-C MULTIMAX Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
INSTALLATION
Never submerge this device in water. Always install it on the outside of the pond.
Always put the unit plug in a socket with an emergency cut out. Never leave the plug in
wet grass or on wet surfaces. When using medicines, the device must be disconnected.
1.
Determine the desired location for the unit and secure the unit using the supports
(A).
2.
Saw the transparent hose connections (B) to the required diameter and screw
them, including the rubber sealing rings (C), onto the device (D).
3.
Unscrew the electric part (E) of the housing (D) and install the lamp (F) in the lamp
holder (G).
4.
Screw the electric part (E) back on the housing (D) and attach the hoses using hose
clamps (not included).
5.
Operate the pump and check the system for free water flow and leaks.
6.
Operate the UV-C device and check if the light is on. You can see the light through
the transparent connectors.
DISMANTELLING
Before maintenance, or dismantelling, of the device, always disconnect the electrical
power from the mains. The device must be cleaned twice a year. When the algae
growth and/or calcium deposits increase, the quartz glass tube (H) and the interior
parts (stainless steel) must be cleaned.The UV-C bulb must be replaced after 9,000
burning hours.
1.
Loosen the hoses and let the water run out of the unit.
2.
Unscrew the electric part (E) with the unit bulb and replace the lamp (F) if
necessary.
3.
Carefully remove the quartz glass, using for example a coin. Never use force!
4.
Clean the quartz glass using appropriate cleaning materials. Always use a soft
cloth to avoid scratching the quartz.
5.
When replacing the quartz in the housing unit ensure that the sealing rings (I) are
correctly positioned.
6.
It is recommended to clean the aluminium interior parts several times a year using
a small brush.
TERMS OF GUARANTEE
The guarantee of this product covers manufacturing faults for a period of 24 months
following the date of purchase. The lamp and the quartz glass are not included in
this guarantee. Claims under the guarantee can only be considered if the product is
returned post-paid together with a valid purchase receipt. Repairs under the guarantee
may exclusively be carried out by the supplier. Guarantee claims that are caused by
errors in the installation or operation of the device will not be considered. Defects
originating from poor maintenance are also excluded from the guarantee. The supplier
will in no way whatsoever be held responsible for any damage caused by the incorrect
operation of the product. The supplier will not be liable for any consequential damage
caused by the breakdown of the device. Complaints regarding transportation damage
will only be considered if the damage was established or confirmed on delivery by the
carrier or the postal authorities. A claim can only be made against the carrier or the
postal authorities if this has been done.

TECHNICAL SPECIFICATIONS

UV-C PL-S Lamp
Pond content l.
Max. pump press.
Max. water press.
Voltage
Multimax 5W
Multimax 9W
5 Watt
9 Watt
2,500
7,000
1,500 l/h
3,000 l/h
1 bar
1 bar
230V 50-60Hz
230V 50-60Hz
Multimax 11W
11 Watt
10,000
5,000 l/h
1 bar
230V 50-60Hz
UV-C MULTIMAX 5W – 9W – 11W |
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido