3. Notes on safety
Deadly shock caused by damaged device components
A Disconnect the mains cable from the power grid in case of damage.
A Contact your Vectron specialist retailer if device components are damaged.
Danger of explosion
The scale is not explosion-protected.
A Never operate the scale in rooms or areas where there is a risk of explosion.
Risk of electric shock or fire due to damaged cables
Cables can be deformed and their insulation damaged.
A Do not store cables near heat sources.
Danger of tripping and damaging device caused by cables lying
unprotected in the room.
A Route the device cables so that they do not pose a potential hazard!
A Route the cables so that they are not subjected to tensile loading.
Incorrect operation due to defects on the device
A Before each use and after special incidents, the user must check the balance for proper
functioning, damage to the housing or live cables.
A If any defects are detected, discontinue all work with the balance immediately and con-
tact your authorized dealer.
The warranty expires if the scale is modified or opened.
A Repairs to the scale must exclusively be carried out by a specialist retailer or by his
authorized agents.
A The type plate must not be removed and must always be legible.
© Vectron Systems AG | Current as of 10/20 | Subject to error and technical modification.
A DANGER
A CAUTION
A NOTICE
27