Publicidad
Idiomas disponibles
Idiomas disponibles
AUTOMATIC ELECTRONIC BATHROOM SCALE - INSTRUCTION MANUAL
PREPARATION BEFORE USE
Insert the batteries
Open the battery cover on the back of the scale and the one on the back of the control terminal. Insert the
batteries in both compartments. Be sure that the polarity of the battery is set properly for proper function (the
polarity as indicated inside the battery compartment cover). If you do not intend to use this unit for a long period
of time, it is advisable to remove the batteries before storage.
Initialisation
The scale needs to be initialised at the first time of use, each time it has been moved or after battery replacement.
Press briefly and sharply with your foot in the middle of the platform. The display reads « 0.0 » then the scale
automatically turns off. Your scale is now is now ready for use.
If your scale has a conversion switch, you can change the measuring units from metric to imperial or vice versa
(i.e KG/ST/LB) by simply pressing the conversion switch located on the under-side of the scale.
INSTRUCTION MANUAL
When weighing yourself for the first time
Set up personal data (stature) before using, it can set up 4 users' data.
• Hold 3s "set" to enter the mode of setup:
• The flashing Pn (n can be 1~4) means the memory of the data.
• Press & to change number then press "SET" to confirm.
• Set up the stature: Press UP, DOWN, and then press SET to confirm.
• The scale will back to the mode of weighing after finishing setting up.
• Stand on the scales.
• The scales will indicate your weight as well as your BMI.
When weighing yourself subsequently
• Stand on the scales.
Auto Recognition
If user does not choose a profile (Pn) manually and step on the scale, the weight value will blink twice
and be locked. After that, the product will auto-identify user. The product compares all users' last weighing
measurement within +-3kg.
• If the product fails to identify then it will only show weight value.
• If product recognizes one user, it will directly indicate your current weight plus the difference between your last
weight measured (a «-» sign in front of the figure indicates weight loss), and then your BMI.
• When it recognizes more than one user profile, it will show all it recognized.
For example, the product recognizes 2 users, it will show the 2 user's
number for 4 seconds, repeat 2 times. When the LCD blinks, user can press
SET to confirm user no. and then the scale will indicate your current weight
plus the difference between your last weight measured (a «-» sign in front of
the figure indicates weight loss), and then your BMI.
• If user does not choose user profile during recognition, then the scale automatically turns off.
10
Exe Notice Easy Follow WWbyT 150x210.indd 10
EN
10/03/16 16:33
Publicidad
