Descargar Imprimir esta página

Dermaroller XCellarisPRO HC Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Thank you for choosing this high-quality product.
Using it two to three times a week will give your skin
a fresher look and glow and it will visibly improve
your complexion.
Mode of Operation and Design:
Use your XCellarisPRO HC on smaller skin areas like face, neck and décolletage. The roller head has 162 tiny stainless-steel
microneedles with an effective length of 0.2 mm.
When rolling across the skin the microneedles penetrate the corneal layer of the skin and remove loose skin cells and deposits.
The result will be a fresher and more radiant looking skin.
Make the treatment with XCellarisPRO HC part of your regular skin care program.
This quality product is re-usable many times with proper care – see care instruction below.
WARNING:
Keep out of reach of children.
CAUTION:
Sharp needles – handle with care. Do not use this product near eyes to avoid injury.
Instruction for use
Please read this instruction carefully. It contains important information on the proper and safe handling of your XCellarisPRO
HC device. Keep these instructions with the product as a reference.
Safety Notes:
If used according to this instruction,
harmful side effects are unknown.
The device is to be used on adults over 18
years.
Do not use on mucous membranes or lips.
For hygienic reasons, the product must
not be shared between individuals
The skin to be treated must be healthy.
In case of an active skin disease or
disorder (acne, eczema, etc.) seek
professional advice first.
Check your device for any damage before
each use. Do not use a damaged device.
Dispose of it safely in the case.
Use instruction:
5.
Clean the skin area to be treated e.g. with a skin cleanser and let it dry.
6.
Roll the device with gentle pressure several times in each direction (vertical, horizontal, diagonal left and right) across
the skin in a star shaped manner to achieve a uniform application pattern. You may stretch the skin gently between
your fingers when rolling across. Larger skin areas should be divided into smaller areas to allow for uniform results.
7.
Let the skin recover for 10-15 minutes.
8.
Afterwards apply a high-quality moisturizing cream or lotion that contains no skin-irritating ingredients.
Tip: Especially sensitive skin may react with redness and scaling after the first few applications. This is a normal and
temporary reaction. Start with only a single application per week until your skin gets used to it. Afterwards you can
increase frequency of application.
XCellarisPRO HC Microneedling Roller
The Original - 100% Made in Germany
Manufactured by:
Dermaroller GmbH
Wilhelm-Mast-Str. 8
38304 Wolfenbüttel, Germany
www.original-dermaroller.de
Dermaroller GmbH is a German manufacturer of medical
and aesthetic devices and cosmetic products. We have
been manufacturing microneedling devices at our own
production site since the year 2000.
That´s why we call our microneedling roller "The Original".
Excessive pressure may cause temporary
painful redness of the skin. It may also
damage the needles.
Do not soak the roller head in alcohol or
solutions containing chlorine ions as this
may damage the needles.
Do not use harsh detergents, solvents or
household cleaners. Do not sterilize with
heat or steam. Do not clean in an
ultrasonic bath. High temperatures > 85 °
C affect the sharpness of the needles and
can damage the plastic parts.

Publicidad

loading