Commissioning - SICK ZSE18 Instrucciones De Operación

-xxxCxx
Wago 733-103
-xxxDxx
Wago 733-104
-xxxExx
Molex 23025-0400 (2x2)
-xxxFxx
Tyco 1445022-4 (1x4)
-xxxGxx
Wuerth 61900411621
(1x4)
1) Front view of connectors
2) ZSO18 will always be n.c. for Q2
7

Commissioning

8021945 | SICK
Subject to change without notice
+ (L+)
(BN)
3 2 1
+ (L+)
(BN)
4 3 2 1
Q1
4 3
(BK)
2 1
+ (L+)
1
(BN)
2
3
4
+ (L+)
1
(BN)
2
3
4
1 Alignment
ZSE18-xxxxx2, -xxxxx8: align the sender (ZSO18) with the receiver (ZEO18). Select the posi‐
tion so that the red emitted light beam hits the receiver. Tip: Use white paper as a reflector
for the sender as an alignment aid. The sender must have a clear view of the receiver, with
no object in the path of the beam [see
screen) of the sensors are completely clear.
ZSE18-xxxxx1, -xxxxx3: align the sender (ZSO18) with the receiver (ZEO18). Select the posi‐
tion so that the infrared light (not visible) hits the receiver. The correct alignment can only
be detected via the LED indicators on the receiver. See
must have a clear view of the receiver, with no object in the path of the beam. Ensure that
the optical openings (front screen) of the sensors are completely clear.
Q1 - (M) -
(BK) (BU)
Q1 - (M) Q2
(BK) (BU) (WH)
Q2 + (L+) - (M)
(WH) (BN) (BU)
Q2 - (M) Q1
(WH) (BU) (BK)
Q2 - (M) Q1
(WH) (BU) (BK)
figure 5]. Ensure that the optical openings (front
figure 5
7
COMMISSIONING
- -
- -
- -
- -
- -
and table 2. The sender
11