About This Documentation; Explanation Of Symbols Used; Symbols In The Documentation; Symbols In The Illustrations - Hilti TE DRS­6-A Manual De Instrucciones

1 Information about the documentation

1.1 About this documentation

• Read this documentation before initial operation or use. This is a prerequisite for safe,
trouble-free handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the
product.
• Always keep the operating instructions with the product and make sure that the
operating instructions are with the product when it is given to other persons.

1.2 Explanation of symbols used

1.2.1 Warnings
Warnings alert persons to hazards that may occur when handling or using the product.
The following signal words are used in combination with a symbol:
DANGER! Draws attention to an imminent hazard that will lead to serious per-
sonal injury or fatality.
WARNING! Draws attention to a potential hazard that could lead to serious
personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that could lead
to minor personal injury or material damage.

1.2.2 Symbols in the documentation

The following symbols are used in this document:
Read the operating instructions before use
Instructions for use and other useful information

1.2.3 Symbols in the illustrations

The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of
these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations
and may deviate from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the
numbers used in the key in the product overview section.
This symbol is intended to draw special attention to certain points when han-
dling the product.

1.3 Product information

Hilti products are designed for professional use and may be operated, serviced and
maintained only by trained, authorized personnel. This personnel must be informed of any
particular hazards that may be encountered. The product and its ancillary equipment can
present hazards if used incorrectly by untrained personnel or if used not in accordance
with the intended use.
The type designation and serial number are stated on the rating plate.
Printed: 21.10.2016 | Doc-Nr: PUB / 5071244 / 000 / 04

English

9