Remote Controller - DJI ZENMUSE X7 Guia De Inicio Rapido

Mounting Filters
At the DJI Online Store, DJI offers a variety of filters for the DJI DL/DL-S lenses. Follow the instructions
below to mount a filter:
1. Rotate the lens hood to remove it.
2. Rotate the balancing ring to remove it.
3. Mount the new filter and the lens hood. When mounting the lens hood, first align the small red
dot on the lens hood with the red dot on the lens, then rotate the lens hood to align the big red
dot with the dot on the lens.
1
Lens hoods for different lenses are not mutually compatible. DO NOT mix them up.
Lens flair may occur when using the filter under some specific situations.
Lens protector is recommended to use in severe shooting environment (ensure to detach the
balancing ring). However, there may be lens flare in some situations when the protector is in use.
Any two of the DL/DL-S lens filters can be used together, reducing the amount of light
coming into the sensor to achieve the desired exposure effect. When attaching two
filters, make sure to detach the lens hood. However, the capability to reduce flare may
reduce without the lens hood. Please download and refer to the Zenmuse X7 User
Manual for more detailed information on how to use the two filters.
Camera Controls

Remote Controller

Press the Shutter Button to capture photos or the Record Button to record videos. Adjust the
camera's tilt using the left dial. Turn the right dial to adjust camera settings.
1
2
Please refer to the Zenmuse X7 User Manual for more camera control information.
6
1. Left Dial
2. Record Button
5
3. Shutter Button
4
4. Intelligent Flight Pause Button
3
5. Right Dial