Flymo Micro Lite Información Importante página 10

Fails to Operate
1. Is the Power Turned On?
2. Check the fuse in the plug, if blown replace.
3. Fuse continues to blow?
Immediately disconnect from the mains
electricity supply and consult your local
approved Electrolux Outdoor Products
Service Centre.
Poor Flotation
1. Disconnect from the mains electricity supply.
2. Clean the underside of the hood and the fan
blades.
3. Raise to a higher height of cut. See
Adjusting the Height of Cut.
4. If poor flotation persists?
Disconnect from the mains electricity
supply and consult your local approved
Electrolux Outdoor Products Service
Centre.
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.
If any part is found to be defective due to faulty
manufacture within two years of original
purchase, Electrolux Outdoor Products, through
its Authorised Service Repairers will effect the
repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the
Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair
wear and tear.
(e) The machine has not been serviced or
repaired, taken apart or tampered with by
any person not authorised by Electrolux
Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original
purchaser.
(h) The machine has not been used outside of
the country for which it was specified.
(i) The machine has not been used
commercially.
* This guarantee is additional to, and in no
way diminishes the customers statutory
rights.
ENGLISH - 5
FAULT FINDING HINTS
SERVICE RECOMMENDATIONS
GUARANTEE AND GUARANTEE POLICY
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it
with a new one.
4. If vibration persists?
Immediately disconnect from the mains
electricity supply and consult your local
approved Electrolux Outdoor Products
Service Centre.
Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual
and understand how to operate and maintain
your machine:
Failures not covered by guarantee
* Replacing worn or damaged plastic cutters.
* Failures as a result of not reporting an initial
fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product
in accordance with the instructions and
recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by
this guarantee.
* The following items listed are considered as
wearing parts and their life is dependent on
regular maintenance and are, therefore not
normally subject to a valid warranty claim:
plastic cutters, Electric Mains cable.
* Caution!
Electrolux Outdoor Products does not accept
liability under the warranty for defects
caused in whole or part, directly or indirectly
by the fitting of replacement parts or
additional parts that are not either
manufactured or approved by Electrolux
Outdoor Products, or by the machine having
been modified in any way