Initial Use; Items Supplied And Transport Inspection - Crivit CEB 2000 A1 Instrucciones De Uso

Do not dry the insoles and the battery pack on
■
the heating, with other sources of heat or with
a hair dryer.
Protect the battery packs against moisture and
■
the penetration of liquids. After attaching the
battery packs to your shoes, they must always
be connected (even when not switched on) to
the insoles when outdoors. Thereby, the penetra-
tion of moisture and soiling in the connector
sockets or plugs will be avoided.
Operate the insoles only with the supplied bat-
■
tery packs.
Use only the supplied power adapter to charge
■
the battery packs. The power adapter is designed
for indoor use and may not be exposed to
moisture.
The power adapter is designed for indoor
■
use and should not be exposed to moisture.
In the event of malfunctions or thunderstorms,
■
remove the plug from the mains power socket.

Initial use

Items supplied and transport inspection

The device is delivered with the following components as standard:
▯ 2 x heatable insoles with integrated heating elements and
connection cables
▯ 2 x Li-ion battery pack
▯ Power adapter
▯ This operating manual
NOTE
► Check the contents to make sure everything is there and for
visible damage.
► If the delivery is not complete, or is damaged due to defec-
tive packaging or through transportation, contact the Service
Hotline (see chapter Service).
│ GB │ IE
■ 22 CEB 2000 A1