Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Seculex 28380000 Modo De Empleo/Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Do not allow the streams of the shower touch sensi-
tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
The product may not be used as a holding handle. A
separate handle must be installed.
The hot and cold supplies must be of equal pres-
sures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• Optimal functioning is only guaranteed with the com-
bination of Hansgrohe hand showers and Hansgrohe
shower hoses.
• If the Secuflex-Box is installed improperly or not at all,
the warranty will become invalid.

Technical Data

Rate of low by 0,3 MPa:
(1 MPa = 10 bar = 147 PSI)
Thermal disinfection:
Safety against backlow
The product is exclusively designed for drinking water!
4
English
24 l/min
max. 70°C / 4 min
Assembly see page 32

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 31)
Operation (see page 37)
Maintenance check valve (see
page 38)
The check valves must be checked regularly
according to DIN EN 1717 in accordance
with national or regional regulations (at least
once a year).
Maintenance Seculex hose (see
page 38)
Repeat cleaning when pull out becomes
diicult.
Spare parts (see page 40)
Cleaning
see enclosed brochure
Test certiicate (see page 31)