Indicator Lights - Brentwood Appliances AR-136 Instrucciones De Operación Y Seguridad

Parts:
Secure Lock
Clasp
Non-Stick
Cooking Plates
Using Your Arepa Maker:
WARNING: Avoid contact with hot parts.
1. Place your Arepa maker on a sturdy and clean flat surface.
2. You can lightly coat the non-stick cooking plates with a small amount of vegetable
oil. You can use a lightly coated paper towel or pastry brush. This helps to prolong
the life of your non-stick.
3. Plug the product into a standard AC electrical outlet, and preheat the appliance by
closing the lid and turning the control dial to its maximum setting
Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes away.
4. When the Power is on, the red power light will come on to indicate the appliance is
preheating. Preheat your appliance for a minimum of 7 minutes. The Green light
indicates the appliance has preheated and is ready to cook.
5. While the appliance preheats, you can prepare your dough.
6. Once appliance has preheated, Green light has turned on, raise the lid using an oven
mitt to prevent any burns.
7. Roll dough into portions and place one (1) in each non-stick cavity.
CAUTION: Do not overfill the product or operate it when empty.
8. Close the lid using the oven mitt and secure lock clasp in position.
NOTE: Steam may be released from the appliance during cooking. Only handle the
appliance using kitchen gloves to avoid burns.
9. Set control dial to desired time. Cooking time generally ranges from 6-9 minutes
and can vary depending on taste.
Lid
Timer Dial
4

Indicator Lights