Before Installing - StetSom DB3000 Instrucción

English
Introduction
Thank you so much for choosing a Stetsom product! The chosen amplifier
has been developed with the most advanced technology for those who are
looking for high performance audio systems with one or more speakers and
"pro car audio" system.

Before installing

Please read this manual carefully.
▪ All product connections must be made with the product turned OFF.
▪ A fuse must be installed between the amplifier and the battery is required
to protect against overcharging. The fuse has to be installed as close to the
battery as possible. Check the proper fuse for the amplifier according to its
consumption.
▪ Use gauges recommended in this manual to avoid the overheating of the
cables to obtain maximum power.
▪ Keep the cables as short as possible to increase sound fidelity and avoid
potential power losses.
▪ Route the installation cables as far away as possible from the original
vehicle wiring as it may cause interference and noise in your audio system.
▪ Perform the installation in a firm, ventilated and dry place.
▪ Installation must be done by a qualified professional.
If you have questions , contact the store where the purchase or installation
was made. For more information please contact our
Customer Service: BR +55 18 2104-9412.
11