Before First Use - Sage the Boss To Go Guía Rápida

Assembly

BEFORE FIRST USE

• Before using your blender for the first time,
remove any packaging material and promotional
labels.
• Be careful when handling the blades as they
are extremely sharp.
• Wash the tumblers, lids, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts (except
motor base) may be washed in the dishwasher,
on the top shelf.
• When first using your blender, you may notice
an odour coming from the motor. This is normal
and will dissipate with use.
ASSEMBLY
1. Remove blades and position the cup with
opening facing up.
2. Add ingredients avoiding filling past the
MAX line.
3. Fix the blade assembly in place with a quarter
turn in the clockwise direction. Ensure the blade
assembly collar is securely in place before
inverting the cup to blend.
Functions
OPERATION
• The blender will only work when the blades and
cup are correctly assembled. This engages the
safety interlock, and allows the motor to run.
• Do not blend continuously for more than
60 seconds at a time. Allow the motor to rest
for 2 minutes before continuing.
• Ingredients can be pulsed by rotating the cup
within the bayonet positions, which will turn the
motor on and off.
• When finished blending, wait a few seconds
for the blades to stop spinning before lifting
the cup assembly off the motor base.
• For safety, turn the motor base off at the wall
and unplug when finished blending.
EN
7