Button Functions; Power Button - DJI RS 2 Guia De Inicio Rapido

Button Functions

Power Button

Press and hold to power on or off.
Tap to lock or unlock the
touchscreen.
Press twice to enter or exit sleep
mode.
Trigger
Tap once to start ActiveTrack
(requires the Image Transmission
System to be enabled).
Press and hold to enter Lock
mode.
Tap twice to re-center the gimbal.
Tap three times to turn the gimbal
180° so that the camera faces you
(selfie mode).
Camera Control Button*
Press halfway for autofocus.
Press once to start or stop
recording.
Press and hold to take a photo.
M Button
Tap to select a user profile.
Press and hold to enter Sport mode.
Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit
Sport mode.
Quickly tap twice to enter portrait mode.
Press three times to enter or exit 3D Roll 360. When in 3D Roll 360, move the joystick
left or right twice to automatically rotate the camera. Tap the trigger twice to stop
continuous auto rotation.
Press and hold the M button together with the trigger to begin auto tune.
* The functions of the camera control button and front dial vary according to the camera and require the
camera control cable to be connected. Refer to the DJI RS 2 Camera Compatibility List on www.dji.
com/rs-2 for more information.
Ronin App
Use the Ronin app to access more functions such as Force Mobile, virtual joystick, and
gimbal and camera settings.
DJI RS 2 Quick Start Guide
Battery Level Button
Press once to check battery leve l.
Front Dial*
Turn to control focus (default
setting).
Joystick
Push up or down to control the
movement of the tilt axis (default
setting). Push left or right to
control the movement of the pan
axis (default setting).
©
2020 DJI OSMO All Rights Reserved. 11