Tabla de contenido
Publicidad
DJI RS 2 Quick Start Guide
D. Mounting the Grip
Insert the grip into the gimbal as shown
position
, and then toggle to the locked position after attaching
2
To remove the grip, toggle the lever to the unlocked position, hold down the release
button, and pull the grip away from the gimbal.
1
The gimbal is folded by default. To unfold the gimbal, toggle the tilt lock, roll lock, and pan
lock levers to the unlocked position and adjust the gimbal position as shown, and then
toggle the three locks to the locked position.
©
4
2020 DJI OSMO All Rights Reserved.
1
2
Roll Lock
. Make sure the grip lever is in the unlocked
Tilt Lock
Pan Lock
.
3
3
Publicidad
Tabla de contenido
