Refco REFVAC-RC Manual De Instrucciones página 11

If the wireless connection is switched on, the
Wireless
REFVAC-RC can be connected with a
connection
REFMATE or with the REFMESH app. If the
connection has not yet been established, the
icon in the status bar flashes. As soon as a
connection is established, the icon is constantly
displayed.
Info
Displays the specific device information after
pressing .
Exit menu
The menu is exited by pressing the back
icon or if there has been no user interaction for
15 seconds, the menu is exited automatically.
Instead of AAA-battery's, an alternative power
supply can be used with a USB Micro-B cable.
For long-term measurements, a power supply is
Power supply
recommended, for which a power bank is
suitable. If the REFVAC or REFVAC-RC is
powered via USB, the status bar will show USB
instead of the battery symbol.
A REFVAC-RC can perform a long-term
measurement together with a REFMATE or
Long-term logging
REFMESH App.
Automatic switch-off must be deactivated for the
long-term measurement.
By holding and then switching on with
, a FW update can be performed using
Firmware-update
the instructions on the REFVAC screen. The
latest firmware version is available in REFMESH
App.
Instruction Manual
8