Black and Decker HT18 Manual De Instrucciones página 5

• Slide the guard onto the front of the
trimmer housing.
• Insert two of the six screws into the
openings on the side of the guard
and tighten securely as shown in
figure b.
• Slide the bail handle onto the front
of the trimmer housing behind the
guard.
• Insert the remaining four screws
into the openings on the side of the
bail handle and tighten securely as
shown in figure c.
attacHiNG ExtENsioN corD to triMMEr
An extension cord retainer is built into the switch handle that
prevents the tool from coming unplugged.
To use this feature, double the
extension cord about 8 inches
(203 mm) from the end, and insert
it into the slot in the back of the
handle area. Hook the loop formed
by doubling the cord, over the cord
retainer tab, as shown in figure D.
Gently tug on the cord to insure that
it is firmly retained in the trimmerʼs
housing.
Plug the receptacle end of the
extension cord into the plug blades in the trimmer.
savE tHEsE iNstrUctioNs for fUtUrE UsE
All manuals and user guides at all-guides.com
B
C
D
oPEratiNG iNstrUctioNs
to tUrN tHE tool oN
To turn the tool "ON", slide the lock off
button, shown in figure E, backward
and, squeeze the trigger switch. Once
the unit is running, you may release the
lock off button.
In order to keep the unit running you
must continue to squeeze the trigger.
To turn the tool "OFF", release the
trigger.
triMMiNG iNstrUctioNs
1. EXTENSION CORD –
(figure f) Always keep extension
cord behind trimmer and away
from the trimming operation.
Never drape it over a hedge being
trimmed. If you cut or damage the
cord, unplug it at the electrical
outlet immediately, before
inspecting or repairing cord.
2. WORKING POSITION – Maintain
proper footing and balance and
do not overreach. Wear safety
goggles, non-skid footwear and rubber gloves when trimming.
Hold the tool firmly in both hands and turn the tool ON. Always
hold the trimmer, as shown in figure f, with one hand on the
switch handle and one hand on the bail handle. Never hold the
tool by the blade guard.
5
4
E
5
F