Reading And Storing The User Manual; Explanation Of Symbols And Terms; Proper Use - Dockin D FINE+ 2 Manual Del Usuario

READING AND STORING THE USER MANUAL

This user manual for your D FINE+ 2 Bluetooth® speaker
(hereinafter referred to only as "D FINE+ 2") contains
important information about safety and handling.
Therefore, read the user manual carefully before using
the D FINE+ 2 and also store it in a safe place for future reference. If
you do not observe the information in the user manual, in particular
the safety notes, this may result in damage to property and, in the
worst case, even injury to persons. If you pass your D FINE+ 2 on to
someone, make sure to also include this user manual.
This user manual is based on the standards and rules in force in the
European Union. When abroad, also be sure to observe the country-
specific guidelines and laws.
You can download this user manual as a PDF file at
www.dockin.net under Support.

EXPLANATION OF SYMBOLS AND TERMS

Here, you will find a list of the safety-relevant symbols and terms,
which are used in this user manual, on the D FINE+ 2 or on its
packaging.
WARNING
This combination of a warning symbol and term indicates a moderate
risk, which, if not avoided, may result in death or severe injury.
NOTE
This signal term warns you of potential damage to property.
6
The GS symbol on the mains adapter stands for
tested safety. Products labelled with this symbol meet
the requirements of the German Product Safety Act
(ProdSG).
This symbol indicates that the wall adapter is a device
belonging to protection class II.
Declaration of conformity (see chapter "Declaration of
conformity"): This symbol indicates products that fulfil
all applicable Community regulations in the European
Economic Area.
This symbol certifies that the radiated electromagnetic
interference of the device is under the limit approved by
the US Federal Communications Commission.
ETL Listed test seal: Products labelled with this symbol
meet the requirements of electrical product safety of
the United States of America.
The wall adapter may only be used indoors.

PROPER USE

The D FINE+ 2 is designed as a speaker for private use. It is not suit-
able for commercial use. You can connect to a source device of your
choice in the following ways: You can connect the source device to
the D FINE+ 2 via Bluetooth® 5.0, EDR, NFC or using an AUX cable.
The D FINE+ 2 also has a powerbank function, that is, you can also
connect suitable external devices to the D FINE+ 2 and charge them
using the integrated rechargeable battery of the D FINE+ 2.
The power cable contained in the package contents is designed for
charging the D FINE+ 2. If you want to charge an external device on
the D FINE+ 2 using the powerbank function, you may, depending on
the respective external device, need an additional cable that is not
included in the package contents.
Only use the D FINE+ 2 as described in this user manual. Any other
7