Sound Mode; Stereo Link Function - Dockin D FINE+ 2 Manual Del Usuario

SOUND MODES
You can switch between three provided sound modes to adjust the
playback to your liking. The provided modes are:
1. Balanced – This mode is the recommended listening mode for
most uses with a balanced sound reproduction and also the
standard setting. The sound mode LED is off in this mode.
2. Bass – This mode enhances the bass performance. Please note
that this can lower the playtime, especially on higher volumes.
The sound mode LED is red in this mode.
3. Clean – This mode lowers the bass output and is used for the
cleanest playback. On higher volumes this mode also has the
longest playtime. The sound mode LED is green in this mode.
The sound modes are switched by pressing the
buttons at the same time for 1 second. The sequence is:
Balanced
Off
Clean
Green
Press and hold
&
16
and symbol
Bass
Red
: Change sound mode

STEREO LINK FUNCTION

Pair two DOCKIN D FINE+ 2:
1. Connect your Bluetooth® playback device to one of the speakers
the usual way (see above)
2. Press the -button twice on both speakers. This will enter ste-
reo link mode.
3. After a short time both units will be paired and a confirmation
sound can be heard.
4. Start the music on the playback device. Both D FINE+ 2 speakers
will play back sound now.
The controls and volume changes are applied to both devices in Ste-
reo Link Mode.
The pairing information is stored. This will automatically reconnect
the speakers the next time they start up. The left / right assignment
is saved as well.
By pressing the Power button twice on one of the two D FINE+ 2 the
Stereo Link Function is disabled and playback is continued with only
one speaker.
Please note that the distance of two paired speakers should be kept
inside of 5m to ensure a stable connection. The playback device still
needs to be inside of 10m for stable connection also.
17