Jotul FS 84 Instrucciones Para Instalación página 26

ENGlish
Contents
1.0 Regulatory information .......................... 26
2.0 Technical data ......................................... 26
3.0 Before installation ...................................27
4.0 Installation ..............................................27
5.0 Installation completed ........................... 30
Figures .............................................................61
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials: place indicated in the installation
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output : instructions.
Efficiency
:
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number when
Country Classification Certificate/ Approved by
contacting your retailer or Jøtul.
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EN
EUR Intermittent
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
26
Serial no.
1.0 Regulatory information
Jøtul FS 84 - 370 is a freestanding product using the Jøtul F 370 as
the burn chamber, which can be positioned against inflammable
walls at the distances described in fig. 1A.
The installation of a fireplace must be carried out in compliance
with national laws and regulations. All local ordinances must
also be complied with when products are installed.
Installation instructions for the stove accompany the surround.
Installation and operating instructions for the fireplace insert
accompany the insert. For day-to-day use, maintenance, service
work, etc. see the General user and maintenance manual.
Contact your local building authorities regarding restrictions and
installation requirements.
The product may not be used until it has been inspected and
approved by qualified personnel.
The product has been tested and documented as a freestanding
stove in accordance with EN 13240.
The approval label for the freestanding product comes with the
installation instructions for the surround. It should be positioned
in a suitably visible place.
2.0 Technical data
The following options are available for the product:
Low, high, kitchen and ceiling height.
Material:
Finish, burn chamber:
Type of fuel:
Max. log length:
Operating range:
Smoke outlet:
Flue pipe dimension:
External air connection:
Weight, burn chamber, approx.:
Weight, surround, low version, approx.:
Weight, surround, high version, approx.:
Weight, surround, kitchen version, approx.:
Weight, surround, ceiling-height version, approx.:
Height, low version:
Height, high version:
Height, kitchen version:
Height, ceiling-height version:
Width, all versions:
Depth, all versions:
Minimum distance to ceiling:
Product dimensions, distances:
Technical data in acc. with EN 13240
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emissions (13 % O ):
2
Flue gas temperature:
Operational type:
"Intermittent combustion" here means normal use of a stove.
That is to say, if you want to continue producing heat, you add
more fuel as soon as the previous load of wood has burnt down
to embers.
Cast iron/concrete
Black/grey paint
Wood
30 cm
3.5-7.0 kW
Top, rear
Ø 150 mm/min. 177 cm
2
cross section
Alu. flex - Ø 100 mm
120 kg
164 kg
202 kg
202 kg
237 kg
1,660 mm
2,071 mm
2,071 mm
2,387 mm
583 mm
501 mm
300 mm
See fig. 1
5.5 kW
5.9 g/s
12 Pa
73% @ 5.8 kW
0,12%
330 C
o
Intermittent