Cube RACE EVO Manual De Instrucciones página 55

Connect sensors
Open the main menu and select „Sensor" to connect new sensors (e.g. for
Bike2) with the computer.
Speed ID1 = Speed sensor Bike1
Cad ID1 = Cadence Bike1
HR ID = Heart rate sensor
Speed ID2 = Speed sensor Bike2
Cad ID2 = Cadence Bike2
Select the ID for connection. Press the S key for new connections. The
computer now searches for sensors. Make sure the sensor is in the vicinity
and is enabled. Move the magnet past the sensor to activate the sensor.
When the connection is successful, the display shows the sensor ID.
Attention: There might be interference from other sensors in the vicinity.
Make sure there are no other enabled sensors within a radius of at least
5 metres.
55