Safety Labels; Important - Shindaiwa T222 Manual Del Propietario - Operador

Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Be extremely careful of
slippery terrain, especially
during rainy weather.
Figure 2

Safety Labels

Safety and Operation Information Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing information labels. New labels are
available from your local authorized Shindaiwa dealer.
READ THE
OPERATOR'SMANUAL
WEAR HEARING AND ANS I Z87.1
APPROVED EYEPROTEC TION
50 F E E T
(15m
)
KEEP BYS T ANDERSAWAY
AT LEAS T 50 FEET (15m)
BEWAREOF THROWN OR
RIC OC HETED OBJEC TS
DO NOT OPERATETHIS
MAC HINEWITH A BLADE
S hindaiwaInc . 19422-00028
Figure 3
4
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Be constantly alert for objects and
debris that could be thrown either
from the rotating cutting attachment or
bounced from a hard surface.

IMPORTANT

This label indicates the minimum distance
between front handle and rear grip per ANSI
B175.3.
T222
Make sure bystanders or
observers outside the 50-
foot "danger zone" wear eye
protection.
50
FEET
When operating in rocky terrain
or near electric wires or fences,
use extreme caution to avoid
contacting such items with the
cutting attachment.
Always make sure
the appropriate cutting
attachment shield is correctly
If contact is made with a hard
object, stop the engine and
inspect the cutting attachment
for damage.
F222
WEAR HEARING AND ANS I Z87.1
APPROVED EYEPROTEC TION
S hindaiwaInc .
installed.
READ THE
OPERATOR'SMANUAL
50 F E E T
(15m
)
KEEP BYS T ANDERSAWAY
AT LEAS T 50 FEET (15m)
BEWAREOF THROWN OR
RIC OC HETED OBJEC TS
DO NOT OPERATETHIS
MAC HINEWITH A BLADE
19422-00028