Getting Started; Attaching The Brush Head - Philips SonicPro 30 Manual Del Usuario

Getting started

Attaching the brush head

Charging your SonicPro
Using your SonicPro
Note: Wall adapter not included. Only use 5V IPX4
adapter (Type A).
Note: Brush heads may vary.
Align the brush head so the bristles point in the
1
same direction as the front of the handle.
2 Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the
brush head and the handle. This allows the brush
head to vibrate properly.
Plug the USB charging cord into a wall adapter that
1
is connected to a electrical outlet.
2 Place the handle on the charger.
- The light of the battery level indicator
illuminates and the handle beeps twice. This
indicates that the toothbrush is charging.
Note: It can take up to 24 hours to fully charge the
battery, but you can use the SonicPro toothbrush
before it is fully charged.
If you are using your SonicPro toothbrush for the first
time, it is normal to feel more vibration than when
using a non-electric toothbrush. It is common for first
time users to apply too much pressure. Only apply
gentle pressure and let the toothbrush do the
brushing for you. Please follow brushing instructions
below for the best experience. To help you transition
9
English