Warranty Conditions; Care And Maintenance - LAVOR Pro FOAM BOX Instrucciones Para El Uso

Inyección de espuma
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 11
USAGE
- Connect the unit to a minimum 6 bar air com-
pressor (not supplied) to inlet coupling ①.
- Adjust the air pressure from 2 to 4 bar with knob
③.
The air pressure setting depends on the deter-
gent and the air compressor
- Attach the end of the hose ⑦ to the quick-relea-
se connector ⑥.
- Fix, at the end of the hose ⑦, the most suitable acces-
sory , foamer lance ⑨ for foamer brush (not included).
- Insert the hoses ⑪⑫ into the detergent tank ⑩
(not supplied).
Using specific detergents is indispensable for
foam production.
Operation:
- Plug the unit in.
- Turn on the switch ④ .
- Press lever ⑧ for foam outflow.
- Distribute the foam.
- Release the lever ⑧ on the tap (the detergent pump
will automatically shut down).
If the detergent runs out, turn off the switches
immediately to prevent damage to the pumps.
END WORK
- When you've finished, turn off the switch.
- Use the lever ⑧ on the tap to drain the residual
detergent.

CARE AND MAINTENANCE

The unit is maintenance-free.
The machine shall be disconnected from its power
source, by removing the plug from the socket-outlet,
during cleaning or maintenance
- Clean the exterior part of the machine with a dry
cloth.
- Store the appliance and the accessories in a dry safe
place, out of the reach of children.
6

WARRANTY CONDITIONS

All our machines are subjected to strict tests and are co-
vered against manufacturing defects in accordance with
applicable regulations. The warranty is effective from the
date of purchase.
The following are not included in the warranty: - Parts
subject to normal wear. - Rubber parts, charcoal, filters
and the accessories and optional accessories. - Accidental
damage, caused by transport, neglect or inadequate tre-
atment, incorrect or improper use and installation failing
- The warranty shall not cover any cleaning operations to
which the operative components may be subjected, such
as clogged nozzles and filter blocked due to limestones.
DISPOSAL (WEEE)
As the owner of electrical or electronic equipment,
the law (in accordance with the EU Directive 2002/96/EC
of 27 January 2003) prohibits you from disposing of this
product or its electrical / electronic accessories as munici-
pal solid waste and obliges you to make use of the appro-
priate waste collection facilities.
The product can be disposed of by returning it to the di-
stributor when a new product is purchased. The new pro-
duct must be equivalent to that being disposed of.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P81.0653

Tabla de contenido