Specifications - Panasonic ER-GC71 Instrucciones De Funcionamiento

This figure must only be used when disposing of the
clipper, and must not be used to repair it. If you
dismantle the clipper yourself, it will no longer be
waterproof, which may cause it to malfunction.
• Remove the clipper from the AC adaptor.
• Slide the power switch to turn on the power and then
keep the power on until the battery is completely
discharged.
• Perform steps 1 to  and lift the battery, and then
remove it.
• Take care not to short-circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.





PB017706 - ER-GC63 53 _(01GB)_04-25-19.indd 19

 






For environmental protection and recycling of
materials
This clipper contains a Nickel-Metal Hydride battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your
country.

Specifications

See the name plate on the AC
Power source adaptor.
(Automatic voltage conversion)
Motor voltage
1.2 V
Charging time Approx. 8 hours
Airborne
60 (dB (A) re 1 pW)
Acoustical Noise
This product is intended for household use only.
19
2019/4/25 15:04:18