Intended Use - BLACK&DECKER FSS1600 Manual De Instrucciones

Intended use

Your Black & Decker steam cleaner has been designed for
sanitising and cleaning tiles, work tops, kitchen surfaces and
bathroom surfaces. This appliance is intended for indoor
household use only.
Warning! Read all of the 'Safety, Maintenance,
Service' manual carefully before operating
this appliance.
Read all of this manual carefully before operating
the appliance.
Features
This appliance includes some or all of the following features.
1. ON/Off switch
2. Lock off button
3. Trigger switch
4. Filler cap
5. Water tank
6. Jug
Accessories
This appliance includes some of the following accessories
others are available to purchase from the Black & Decker
website.
The performance of your appliance depends on the accessory
used. Black & Decker accessories are engineered to high
quality standards and designed to enhance the performance
of your appliance. By using these accessories you will get the
very best from your appliance.
Flexible hose and handle
For convenient use of all accessories.
Variable stem jet nozzle
For higher pressure steam bursts, twist to change
the spray pattern of the steam burst.
Small brush (Blue)
For cleaning bathrooms.
Small brush (Yellow)
For cleaning kitchens.
(Original instructions)
Small brush (Green)
For cleaning toilets.
Large Squeegee
For cleaning glass doors and windows.
Warning! Do not use the window squeegee on cold
glass. It may cause the glass to break.
Detail tile cleaner
For cleaning grouted areas between tiles.
Large scrub brush cleaner with scraper
For cleaning heavily soiled object such as BBQ's.
Assembly
Warning! Before attempting any of the following operations,
make sure that the appliance is switched off and unplugged
and that the appliance is cold and does not contain any water.
Attaching the hose and accessories (Fig. A & B)
Warning! Inspect the seal (7) on the steam nozzle (11) and
hose (8) before each use. If the seal is missing or damaged
then please contact your nearest authorised repair agent. Do
not use the appliance.
Attaching the hose (Fig. A)
Press in the clips (9) on either side of the hose (8).
u
Press the hose (8) onto the steam nozzle (11) and release
u
the clips (9).
Important! Ensure that the hose (8) is securely fastened
before using the hand held steam cleaner. If steam escapes
from the joint then the hose is not correctly fit, allow the unit to
cool then remove and re-fit the hose.
Attaching the variable steam jet nozzle (Fig. B)
Press in the clips (13) on either side of the variable steam
u
jet nozzle (12).
Press the variable steam jet nozzle onto the steam nozzle
u
(11) or the hose (8) and release the clips (13).
Important! Ensure that the variable steam jet nozzle (12) is
securely fastened before using the hand held steam cleaner.
If steam escapes from the joint then the variable steam jet
nozzle is not correctly fit, allow the unit to cool then remove
and re-fit the variable steam jet nozzle.
ENGLISH
3