Cleaning And Care; Disposal; Remote Control Sp; Safety Instructions - Crivit PG-02 Instrucciones De Uso

7. Cleaning and care

• Wash your helmet only with lukewarm water, mild soap and a soft cloth.
• Leave your helmet to air dry after every use.
• Wash the inner padding with lukewarm water and mild soap and then leave to air
dry.

8. Disposal

You must dispose of the helmet through an authorised waste disposal company or a
communal waste disposal facility.

Safety instructions

• Ensure that the remote control battery is always charged with a micro USB cable.
• Never leave the remote control unattended on your handlebars.
• When attaching the remote control to the handlebars, always ensure that you attach
the remote control in such a way that you can read the writing.
• Before each use, check that the remote control works properly in combination with the
helmet and its back light and indicator light functions.

User information

1. Before the first use
Charge the battery completely before the first use (Fig. J):
• Connect the micro USB charging cable with the USB connection at the back of the
remote control
• The ON/OFF button lights up in red during the charging process.
• Once the ON/OFF button light goes out, this indicates that charging is complete.
• Remove the micro USB cable from the remote control once charging is complete.

2. Attaching to handlebars

• Attach the remote control to your handlebars using the recess provided (Fig. J).
• To attach the remote control, place the screw in the provided opening and tighten it
181206_CO-1324_LB09_BDA_GG.indd 8

REMOTE CONTROL SP-11

8
Remote control SP-11
03.01.2019 08:27:41