FITFIU FITNESS GYM-100 Manual De Instrucciones página 44

STEP 2
1. Slide the Ø62*16 weight buffer (#39) and the weight stack through the guide rods (#3) in succession.
NOTE: Carefully slide the Weight Plates (#33) one by one onto the guide rods, do not lift
more than you can safely control.
2. Place the weight bushing(#35) on the weight selector bar(#37) and fix it in the first hole of the weight
selector bar(#37) using the weight pin(#36). Insert the Bar(#37) into the hole of the Weight Plates(#33).
Slide the upper weight plate(#32) into the weight stack. Place the weight washer(#34) into the hole in
the upper weight plate(#32). Insert the "L" pin(#38) through the bar(#37) to obtain the proper weight.
3. Attach part (#15,#23) to part (#6) using (2) M10*75(#67) hex bolts.
STEP 3
1. Insert the 50*50(#49) plugs into part(#1).
2. Attach part(#1) to part(#5) using (2)
M10*75(#67) hex bolts.
3. Insert each of the guide rods (#4) into the
holes in part (#1), and then attach part (#1)
to the guide rods (#4) using (2) M10*25 hex
bolts (#66).
4. Insert the plug 38*38(#47) into the part
(#8). Place the cap(#48) on part(#8). Attach
part(#8) to part(#5) using (2)Hex bolts
M10*70(#68).
5. Attach part(#18) to part(#8) using (1)Hex
bolt M8*45(#72). Screw the plastic nut
(#40) to part (#18).
6. Attach part(#21) to part(#5) using (2)
M10*65(#69) hex bolts.
44