EINHELL BMS 700 Instrucciones Para El Uso página 7

Anleitung BMS 700
C
A
13.11.2001 7:10 Uhr
Push
Forward/Reverse selection:
lever A
Forward (clockwise)
Push lever A into position F
Reverse (anticlockwise)
Push lever A in position R
B
Selector switch Drill/Hammer
Seite 7
Lever position
F: Forward (clockwise)
R: Reverse (anticlockwise)
On/Off switch:
To switch on: Press switch A
Continuous operation: Lock
switch A with locking button B
To switch off: Press switch A
briefly
The speed is varied by applying
more or less pressure on switch A.
You can preselect the speed by
turning the knurled screw C in
switch A.
Push the slide switch to posi-
tion 'hammer'. Do not move
this switch until the drill has
stopped!
Please note: This switch
should be in 'drill' position
when drilling holes in tiles.
Push the slide switch to posi-
tion 'drill'. Do not move this
switch until the drill has
stopped!
GB
7