Battery Replacement - Steren SEG-500 Manual De Instrucciones

Setting a security code
1.- Press the red button -located inside of the strong box- while the door is
open.
2.- The yellow LED lights on. You have 20 seconds to enter a new security
code. You can enter from 1 to 8 numerical digits. To finalize the process,
press A or B button, and the yellow LED will off.

Battery replacement

If the red LED blinks, you must change the batteries.
1.- Open the strong box's door.
2.- Release the batteries compartment
cover.
3.- Place 4 batteries type AA. Pay
attention to polarity.
4.- Replace the batteries compartment.
5.- Make a test before to close the door.
7